900 1800 2100 Tri band Signal Booster -MF102

A mobile signal booster (also called a cell phone repeater) is a device that amplifies weak cellular signals to improve call quality, data speeds, and network coverage.
Extended coverage in weak-signal areas (homes, offices, cars).
Receives weak signal → Amplifies it → Retransmits stronger signal indoors.

Key Components:

  1. Outdoor Antenna – Captures weak signals from cell towers.

  2. Amplifier – Boosts the signal strength.

  3. Indoor Antenna – Rebroadcasts the enhanced signal inside a building or vehicle.

Benefits:

Better call clarity & fewer dropped calls.

Faster 4G/5G data speeds.

Extended coverage in weak-signal areas (homes, offices, cars).

Common Uses:

Rural areas, basements, large buildings, vehicles.

Note: Must be compatible with carrier frequencies and comply with local regulations.Tri-Band (900/1800/2100 MHz) Mobile Signal Booster – Detailed Specifications

General Specifications:

Frequency Bands Supported:

900 MHz (GSM/3G/4G LTE Band 8)

1800 MHz (4G LTE Band 3)

2100 MHz (3G/4G LTE Band 1)

 Compatible Networks: 2G (GSM), 3G (UMTS/HSPA), 4G LTE

  • Gain: 60~70 dB (typical)

  • Maximum Output Power: 25 dBm (100 mW) (varies by model)

  • Coverage Area: Up to 500~800sq. ft. (depends on signal strength & obstacles)

  • Noise Figure: ≤ 5 dB (ensures minimal signal degradation)

Components:

  1. Outdoor Antenna (Donor Antenna):

    • Type: Directional Yagi or Omni-directional or log periodic antenna

    • Gain: 8~14dBi

    • Impedance: 50 Ω

    • Connector: N-type or SMA

  2. Indoor Antenna (Broadcast Antenna):

    • Type: Panel or Dome antenna or Omni- directional antenna

    • Gain: 3~8 dBi

    • Impedance: 50 Ω

    • Connector: N-type or SMA

  3. Amplifier Unit:

    • Automatic Gain Control (AGC): Prevents oscillation & over-amplification

    • Self-Oscillation Protection: Ensures stable performance

    • LED Indicators: Signal strength, power status

Power & Connectivity:

  • Power Supply: AC 110-240V (with adapter) or DC 12V

  • Cable Type: Low-loss coaxial (RG6/RG58)

  • Cable Length: 10~20 meters (varies by kit)

Additional Features:

  • Carrier Compatibility: Works with major providers 

  • Plug-and-Play Setup: No software configuration needed

Typical Applications:

  • Homes, offices, basements

  • Warehouses, remote buildings

  • Vehicles (with appropriate mobile booster kit)

Would you like recommendations for specific models or installation tips?

OEM & ODM are accepted. 

"Best signal booster for rural areas"

"Signal booster for home"

"Office cell phone booster"

"Car mobile signal booster"

"Signal booster for basement"

"Signal booster for apartment"

"Signal booster for boat/RV"


Categories
Hot Products
Contact Us